Elastic Nail Set is a set of tools that contain:

• "F" Tool with Handle.
• Guiding Cannulated Rod.
• Oblique (Large).


• Oblique (Small).
• Pointed Awl.
• Pin Wrench.
• Ram.
• "T" Handle for Drill Chuck.
• Jambo Rod Cutter.
• Drill Sleeve 2.7mm, 3.2mm & 4.5mm.


• Drill 2.7mm, 3.2mm, 4.5mm.
• Elastic Nail Dia: 2mm, 2.5mm, 3mm, 3.5mm, 4mm.


• Elastic Nial Length: 400mm.

This contains:

PFN Awl	Extractor Handle	Distal Protection Sleeve 8mm
Extractor Rod	Targeting Device 135 Deg.	Proximal Sleeve for Guide Wire 2mm & 2.5mm (2Nos)
C.C.Tap for Screw (2Nos)	Targeting Device 130 Deg.	Drill Sleeve for 4mm
Step Drill (2Nos)	Socket Wrench with "T" Handle	Guide Wire 2mm & 2.5mm
PFN Screw Driver	Fix Spanner (Tightener)	Extra Locking Bolt
"T" Handle for Step Drill & C.C.Tap	Introducer	Extra Attachment
Pointed Awl for Screw (Big & Small) (2 Nos)	Distal Locking Bolt	P.F.N Nail in 130 Deg
Protection Sleeve for PFN Awl	Locking Bolt (2Nos)	P.F.N Nail in 135 Deg
Introducer / Jig Handle	Tommy Bar	P.F.N Nail Dia: 9mm, 10mm, 11mm & 12 mm
Hammer	S.S.Drill 4mm x 10"	P.F.N Locking Bolt Dia: 6.4mm Length: 50mm to 110mm
Hammering Bolt	Proximal Protection Sleeve 8mm & 10mm (2Nos)	P.F.N. Locking Bolt Dia: 7.9mm Length: 55mm to 120mm

Interlocking Nail Instrument set for femur & tibia. It comes with a complete set of instruments for orthopedic surgery.

D.H.S & D.C.S Set Content:

• D.H.S coupling handle
• D.H.S triple reamer
• D.H.S triple reamer
• D.H.S & D.C.S tap with sleeve
• D.H.S screw introducer impactor with sleeve
• Tube introducer
• Tube impactor nylon phase
• Compression device


• Fixed angle guide 130 deg. & 135 deg.
• D.C.S angle guide 95 deg.
• Direct measuring device
• Guide wire 2.5mm x 9 "
• Adjustable angle guide
• Container with tray

D.H.S Plate available in:

• Round Hole & D.C.P hole
• DHS holes: 4 hole to 14 hole
• D.C.S Plate available in round hole & DCP Hole
• DCS holes: 4 hole to 12 hole
• D.H.S / D.C.S screws length: 50mm to 110mm

Cannulated screw set for 6.5MM/7MM/4MM contain:

• Protection Sleeve
• Drill Dit Cannulated
• Tap Cannulated


• Screw Driver Cannulated
• Guide Wire

Available in:

• 16mm Thread, 32mm Thread & Fully Threaded
• C.C.Screw Dia: 6.5mm / 7mm Length: 25mm to 110mm (with 5mm Diff)


• C.C.Screw for 4mm in 16mm Thread & Fully Threaded
• C.S.Screw Dia: 4mm Length: 20mm to 80mm (with 5mm Diff)


• Washer for 6.5mm, 7mm & 4mm

Illizarov Carbon fibre ring & ring fixator.
Illizarov half ring are available in :

• Carbon & S.S.from Dia : 80mm ID to 240mm ID
• Carbon & S.S Italian Arc Dia: 180mm ID x 90 / 120 Deg


• Carbon & S.S. Italian Arc Dia: 200mm ID x 90 / 120 Deg
• Carbon & S.S. 5/8 Ring from Dia: 80mm ID to 220mm ID & Carbon Connecting Plate 3 Hole & 4 Hole


• Carbon Rod Dia: 4mm, 8mm & 11mm
• Oblique Support
• Threaded Rods 6mm
• Telescopic Sleeve 3" to 8"
• Telescopic Sleeve Graduated 3" to 8"
• Male & Female Post 2 Hoe, to 4 Hole " Male & Female Hinges
• Short Connecting Plate 2 Hole to 10 Hole
• Connecting Plate with Threaded End 5 Hole to 12 Hole
• Twisted Plate 1 Hole to 3 Hole
• Wire Fixation Bolts (central & Side Hole)
• Multiple Pin Fixation Clamp
• Single Pin Fixation Clamp
• Threaded Socket
• Curved Plate 3 Holes
• K-Wire Bayonett Tip & Arrow Tip 1.5mm & 1.8mm
• K-Olive Wire Bayonett Tip & Arrow Tip 1.5mm & 1.8mm
• Wrencho Cube 1 Hole to 4 Hole
• Connecting Bolt & Nuts
• Alenkey Type Box Spanner 10mm & 11mm
• Slotted Washer, Conical Washer, Plain Washer 2mm, 3mm & 4mm, Nylon Washer, Transverse Device, Quadragnal Nuts, Wire Tentioner (Simple), Dinamo Meter Wire Tensioner

S.S.Drill(jacob & A.O.coupling type), special solid/c.c.reamer, special flexible reamer(fix/detach):

• ManMan type flexible reamer (Fixed / Detachable) Dia: 8mm to 15mm & 8.5mm to 14.5mm.


• "K" & "V" Nail Reamer Dia: 8mm to 14mm (Solid or Cannulated with "T" Handle).


• Square Nail Reamer Dia: 2.5mm to 5mm (with 0.5mm Diff).
• Special Cannulated Drill for 6.5mm,7mm &4mm Screw .


• Special Maxillo Facial Drill of Dia:1mm, 1.5mm, 2mm (Jacob Type / A.O.Coupling Type)


• Special All Size of S.S.Drill (Solid) From Dia: 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6.0mm, 8mm Length from:100 mm to 300mm available in Ready Stock.

Cortical screws & all type of S.S. & titanium screws. Cortical Screws are available in following range:

• 4.5mm # Corticals Screws 3.5mm
• Corticals Screw 2.7mm
• Malleolar Screw 4.5mm
• Cancellous Screws 6.5mm (16mm / 32mm / Full Threaded)
• Cannulated Cancellous Screws 6.5mm / 7mm (16mm / 32mm / full Threaded)
• Cancellous Screw 4mm (16mm / Full Threaded)
• Cannulated Cancellous Screw 4mm (16mm / Full Threaded)
• Maxillo Facial Mini Screw 1.5mm, 2mm & 2.5mm available in S.S. & Titanium Grade (Mini Screw of 2mm & 2.5mm available in Special Rectangular Head also)

D.C.P, reconstruction plate, L.C.D.C.P, tubular plate, "T"/"L"/buttress plate, cobra & calcaneal plate. Bone plates available In S.S. & titanium grade:

• DCP Plate in S.S. & Titanium (Small, Narrow, Broad)
• LCDCP (Small, Narrow, Broad)


• Hook Plate
• "Y" Plate
• Reconstruction Plate for 2.7mm Screw (Round / DCP Hole)
• Reconstruction Plate for 3.5mm Screw (Round/DCP Hole
• Reconstruction Plate for 4.5mm Screw (Round / DCP Hole)
• Semi Tubular Plate
• One Third (1/3) Tubular Plate
• "T" Plate & "T" Buttress Plate
• "L" Buttress Plate (Left/Right)
• Clover Leaf Plate
• Lateral Tibial Condylar Plate (Hockey Plate) (Left/Right), Lateral Femoral Condylar Plate (C.B.Plate) (Left/Right)


• Cobra Plate (Round / DCP Hole)
• Elis "T" Plate
• Small Oblique Plate
• Small "T" Plate
• Calcaneal Plate ("Y", "P", "Q" Shape)

Austin moore prostresis, thompson prosthesis & instruments set contain:

• AMP Head Extractor
• Head Guage for AMP
• AMP Rasp with Tommy Bar
• Murphy Skid
• AMP Head Impactor with Nylon Phase
• Excel Rasp for Large Stem
• AMP Prosthesis available from Dia: 37mm to 55mm
• Thompson Prosthesis available from Diameter: 37mm to 55mm
• AMP Pin with Two Nuts